NEC VT770 Projector User Manual


 
11
NEC’s exclusive Advanced AccuBlend intelligent pixel blending technology provides for extremely accurate
image compression and HDTV (1920x1080 and 1280x720) display resolution*.
Supports most IBM VGA, SVGA, XGA, Macintosh, component signal (YCbCr/YPbPr) or other RGB signals
within a horizontal frequency range of 15 to 100 kHz and a vertical frequency range of 50 to 120 Hz. This
includes NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60 and SECAM standard video signals
NOTE: Composite video standards are as follows:
NTSC: U.S. TV standard for video in U.S. and Canada.
PAL: TV standard used in Western Europe.
PAL-N: TV standard used in Argentine, Paraguay and Uruguay.
PAL-M: TV standard used in Brazil.
PAL60: TV standard used for NTSC playback on PAL TVs.
SECAM: TV standard used in France and Eastern Europe.
NTSC4.43: TV standard used in Middle East countries.
*1 Do not attempt to mount the projector on the ceiling yourself. To ensure proper operation and reduce the risk
of bodily injury a qualified technician must install the projector. In addition, the ceiling must be strong enough
to support the projector and the installation must be in accordance with any local building codes. Please
consult your dealer for more information.
*2 HDTV 1080i (1920 ן 1080) and HDTV 720 p (1280 ן 720) are displayed with NECs Advanced AccuBlend
technology.
Thank you for your purchase of the NEC VT770 projector.
For additional information, please visit our website at:
US: http://www.necvisualsystems.com
Europe: http://www.nec-europe.com/
Global: http:www.nec-pj.com/
1. Introduction