Filter
Top Products
93
Setup [Page3]
Selecting Signal Format [Signal Select]
Computer 1/2
Allows you to set "Computer 1" and "Computer 2" to automatically detect an incoming RGB or component source
such as a computer or DVD player. However there may be some RGB and component signals that the projector is
unable to detect. In this case, select "RGB" or "Component".
Select "Scart" in COMPUTER 2 for the European Scart signal.
Component
Normally select "Auto" and the projector automatically detects an incoming signal. However there may be some
component signals that the projector is unable to detect.
If this is the case, select "Component".
NOTE: When using the "Y" connector of the COMPONENT connectors to display a Video signal, select "Video".
Selecting Color System [Color System]
This feature enables you to select composite video standards automatically or manually.
Normally select "Auto" and the projector will automatically detect the video standard.
In the case where the projector has difficulty detecting the video standard, select the appropriate video standard from
the menu.
7. Using On-Screen Menu