NetComm NB6PLUS4W Network Router User Manual


 
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide YML854Rev1
36 www.netcomm.com.au
PPP over ATM (PPPoA) Mode
Description:
In this deployment environment, the PPPoA session is between the ADSL WAN interface and BRAS. The
ADSL Router gets a public IP address from BRAS when connecting to DSLAM. The multiple client PCs will get
private IP address from the DHCP server enabled on private LAN. The enabled NAT mechanism will translate
the IP information for clients to access the Internet.
Configuration:
1. Start your browser and type 192.168.1.1 as the address to access ADSL web-based manager.
2. Go to Quick StartQuick Setup. Uncheck Auto Scan Internet Connection (PVC). Key in the VCI and VPI
value, e.g.:
VPI – 8
VCI – 35
Click the Next button.
3. On the Configure Internet ConnectionConnection Type page, select PPP over ATM (PPPoA) then click
the Next button.
4. On the WAN IP Settings page, select Obtain an IP address automatically and check Enable NAT box.
Click Next.
5. On the PPP Username and Password page, enter the PPP username and password that you got from
your ISP. Select Always on or select Dial on Demand and key in the inactivity timeout value. (The default
value is 20 minutes.) Then click Next.
6. On the Configure LAN side Settings page, key in the IP address and subnet mask for your LAN, e.g.:
Primary IP address: 192.168.1.1
Subnet Mask: 255.255.255.0
Check DHCP Server on box. And key in the start and end IP address, e.g.:
Start IP Address:192.168.1.2
End IP Address: 192.168.1.254
Then enter the leased time ( the default is 1 day), and click Next.
7. Check the network information on This Internet Connection -- Summary page. Make sure the settings
match the information provided by your ISP. Click Finish.