NetComm NB6PLUS4W Network Router User Manual


 
YML854 Rev1 NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4WnNB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide
www.netcomm.com.au 59
DHCP Server On:
Check this item if DHCP service is needed on the LAN. The router will assign IP address and gateway
address for each of your PCs. Enter the information for Start IP, End IP and Lease Time if you enable
this function. The default value for lease time is one day.
DHCP Server Off:
Check this item if DHCP service is not needed on the LAN; like our example.
You can check the settings on the Summary page now.
If you find anything incorrect, click Back to modify the settings.
If everything is OK, click Finish to accept these settings.
And the following page will appear.
Now, the system will reboot to activate the new settings that you have done in this section.
Please wait for 2 minutes before restarting the router.