NETGEAR 700 Series Switch User Manual


 
Index 3
Inbound Errors 4-6
Inbound Non-unicast Packet rate 4-5
Inbound Non-unicast Packets 4-6
Inbound Octet Rate 4-5
Inbound Octets 4-6
Inbound Unicast Packet Rate 4-5
Inbound Unicast Packets 4-6
IP Configuration 3-7, 4-13
L
Last Saved option 3-18, 4-28
M
MAC 4-21
MAC > Address Aging 4-36
MAC Address Manager 3-24
MAC Address Table 3-6
MAC> Address Aging 4-36
MAC> Static Addresses 4-36
Main Menu> System 3-5
Management Access 1-1
Max Age 3-23, 4-34
MDI/MDI-X D-2
MDI/MDI-X wiring D-7
Multimedia Support 3-26, 4-37
Multimedia Support> Static Multicast Groups 4-38
Multimedia Support>Enable/Disable IGMP 4-37
N
Net & save option 3-17, 4-27
Net option 3-17, 4-27
non-volatile memory 2-1
NVRAM 2-1, 4-17
O
Outbound Discard Rate 4-6
Outbound Discards 4-6
Outbound Error Rate 4-6
Outbound Errors 4-6
Outbound Non-unicast Packet Rate 4-6
Outbound Non-unicast Packets 4-6
Outbound Octet Rate 4-5
Outbound Octets 4-6
Outbound Unicast Packet Rate 4-5
Outbound Unicast Packets 4-6
P
Passwords 4-18
Port Configuration 3-8, 4-14
Port Mirroring 3-15, 4-20, 4-25
Port Priority 3-19
Port Selection 4-8
Port Settings 4-10
Port Trunking 3-15, 4-20
Port Trunking 4-25
Port-Based Authentication 4-20
Primary VLAN 4-31
Priority 3-24, 4-35
R
RADIUS 4-20
Rate/Duplex field 3-9
Refresh Rate 4-8
Restore Factory Defaults 4-17
RS-232 serial port 2-1
S
Save Configuration 4-16
Security 3-11
Set-Up 3-7
Set-Up> GBIC 3-10
SNMP 1-3, 3-28, 4-38
SNMP> Community Table 4-39
SNMP> Host Table 3-29