Filter
Top Products
700 Series Managed Switch User’s Guide for Software v2.1
4-8 Administration Console Telnet Interface
SM-10004-02
IP Assignment Mode. The user manually enters IP related information
• Bootstrap Protocol, which allows the switch to discover its own IP address from a BootP
server on the network
• DHCP, which allows the switch to accept DHCP broadcasts from a DHCP server and
automatically configures IP related information
The default setting is DHCP, to enable quick and easy set-up. However, since you need to know
the IP address of your switch to remotely manage it and DHCP assignments can change, change
the IP assignment mode from DHCP to manual after the switch has obtained its IP address.
Figure 4-11: Set-up Manager: IP Configuration
Note: In DHCP mode, if the switch fails to get a DHCP assignment, the switch defaults to
192.168.0.1 as its IP address.
If you are in the manual mode and need to configure the IP information, enter a site-specific IP
address, Gateway Address, and Network Mask (or subnet mask). Consult your network
administrator for the information.
Press Ctrl-W to save any changes to NVRAM.
Main Menu> Set-Up> Port Configuration
On this page, you can set up the port characteristics related to link operations. All of the
parameters on this page are toggle settings. To change, or toggle, between options, hit Ctrl-M to
move the curser to the ports field and simply strike the space bar when the appropriate option is
highlighted. To modify ports 17 to 26, you must tab through ports 1 to 16. The comments field is
available for you to enter a description of the port.