Filter
Top Products
Wireless Settings
33
N300 Wireless ADSL2+ Modem Router DGN2200v3
2. Click Next. The following screen lets you select the method for adding the WPS client.
WPS Push button method
3. Select either Push Button or PIN Number. With either method, the modem router tries to
communicate with the computer or wireless device, set the wireless security for wireless
device, and allow it to join the wireless network.
The PIN method displays this screen so you can en
ter the client security PIN number:
WPS PIN method
While the modem router attempts to connect, the WPS LED on the front of the modem
router blinks green. When the modem router establishes a WPS connection, the LED is
solid green and the modem router WPS screen displays a confirmation message.
4. Repe
at to add another WPS client to your network.
Wireless Settings Screen
The Wireless Settings screen lets you view or change the wireless network settings. Note
that your preset modem router has a unique network name and password, located on the
product label. NETGEAR recommends that you use these settings. If you decide to change
them, note the new settings and save them in a secure location.
Note: If you use a wireless computer to change the wireless network
name (SSID) or security options, you are disconnected when you
click Apply. To avoid this problem, use a computer with a wired
connection to access the modem router.