Filter
Top Products
Advanced Settings
94
N300 Wireless ADSL2+ Modem Router DGN2200v3
Select Advanced > Wireless Repeating Function to display the following screen:
• Enable Wireless Repeating Function. Select this check box if you want to use the
wireless repeating function.
• Disab
le Wireless Client Association. If your modem router is the repeater, selecting
this check box means that wireless clients cannot associate with it. Only LAN client
associations are allowed.
- If you are
setting up a point-to-point bridge, select this check box.
- If you wan
t all client traffic to go through the other access point (repeater with wireless
client association), leave this check box cleared.
• W
ireless MAC of this router. This field displays the MAC address for your modem router
for your reference. You will need to enter this MAC address in the corresponding Wireless
Repeating Function screen of the other access point you are using.
• W
ireless Repeater. If your modem router is the repeater, select this check box.
• Repe
ater IP Address. If your modem router is the repeater, enter the IP address of the
other access point.
• Base
Station MAC Address. If your modem router is the repeater, enter the MAC
address for the access point that is the base station.
• W
ireless Base Station. If your modem router is the base station, select this check box.
• Disabl
e Wireless Client Association. If your modem router is the base station, selecting
this check box means that wireless clients cannot associate with it. Only LAN client
associations are allowed.
• Repe
ater MAC Address (1 through 4). If your modem router is the base station, it can
act as the “parent” of up to 4 other access points. Enter the MAC addresses of the other
access points in these fields.