Filter
Top Products
E32
The Shooting Menu (
A
(Auto) Mode)
Reference Section
Using Preset Manual
Use when you want to make pictures taken under unusual lighting conditions
(e.g., lamps with reddish-light) look as though they were shot in normal light.
Use the procedure below to measure the white balance value under the lighting
used during shooting.
1 Place a white or gray reference object under the lighting that will be
used during shooting.
2 Display the shooting menu (A58), use the
multi selector to set White balance to
b Preset manual, then press the
k
button.
• The lens extends to the zoom position for
measurement.
3 Choose Measure.
• To apply the most recently measured white balance
value, select Cancel and press the k button. The most
recently measured white balance value will be set
without re-measuring the value.
4 Frame a white or gray reference object in the
reference object frame and press the k
button.
• The shutter is released and the new white balance
preset value is set (no picture is recorded).
B Note on Preset Manual
The camera cannot measure a white balance value for when the flash fires. When shooting with the
flash, set White balance to Auto or Flash.
CloudyCloudy
FluorescentFluorescent
IncandescentIncandescent
DaylightDaylight
Preset manual
AutoAut
o
Cloudy
Fluore
scent
Incandescent
Daylight
Auto
FlashFlashFlash
White balance
Measure
Cancel
Preset manual
Measure
Cancel
Preset manual
Reference object frame