Nikon AW110 Printer Accessories User Manual


 
vii
Introduction
For Your Safety
Observe caution when
handling the battery
The battery may leak, overheat, or
explode if improperly handled.
Observe the following precautions
when handling the battery for use in
this product:
Before replacing the battery, turn the
product off. If you are using the
battery charger/AC adapter, be sure
it is unplugged.
Use only the Rechargeable Li-ion
Battery EN-EL12 (included). Charge
the battery by inserting it in the
Battery Charger MH-65 (included).
When inserting the battery, do not
attempt to insert it upside down or
backwards.
Do not disassemble the battery or
attempt to remove or break the
battery insulation or casing.
Do not expose the battery to flame
or to excessive heat.
Do not immerse in or expose to water.
Replace the terminal cover when
transporting the battery. Do not
transport or store with metal objects
such as necklaces or hairpins.
The battery is prone to leakage when
fully discharged. To avoid damage to
the product, be sure to remove the
battery when no charge remains.
Discontinue use immediately should
you notice any change in the battery,
such as discoloration or deformation.
If liquid from the damaged battery
comes in contact with clothing or
skin, rinse immediately with plenty
of water.
Observe the following
precautions when handling
the battery charger
Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could result
in fire.
Do not handle the plug or go near
the battery charger during lightning
storms. Failure to observe this
precaution could result in electric
shock.
Do not damage, modify, forcibly tug
or bend the USB cable, place it under
heavy objects, or expose it to heat or
flames. Should the insulation be
damaged and the wires become
exposed, take it to a Nikon-
authorized service representative for
inspection. Failure to observe these
precautions could result in fire or
electric shock.
Do not handle the plug or battery
charger with wet hands. Failure to
observe this precaution could result
in electric shock.
Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DC-
to-AC inverters. Failure to observe
this precaution could damage the
product or cause overheating or fire.
Use appropriate cables
When connecting cables to the input
and output jacks, use only the cables
provided or sold by Nikon for the
purpose, to maintain compliance with
product regulations.