Filter
Top Products
E63
GPS Options Menu
Reference Section
4 When log recording is completed, use the
multi selector to end the log that was selected
in step 1 using Create log of the GPS options
menu, and press the k button.
5 Select Save logs, and press the k button.
• The log data is saved to a memory card.
B Notes on Log Recording
• If the date and time are not set, the log cannot be recorded.
• Use a fully charged battery to prevent the camera from turning off during log recording. When the
battery power becomes exhausted, log recording ends.
While the altitude log or water depth log is recorded, the battery is exhausted much faster.
Exercise caution regarding the remaining battery level.
• Log recording ends due to the operations below even when there is time remaining for log
recording.
- The battery is removed
- Record GPS data in GPS options is set to Off when the GPS log is recorded
- Reset all in the setup menu is performed
- The setting of the internal clock (time zone or date and time) is changed
• Log recording is paused during the operations below.
- During continuous shooting
- During movie recording
- When connected with a USB cable or HDMI cable
• Even when the camera is turned off, log recording is continuously performed until the preset time
has elapsed if there is still time remaining for log recording.
• The log data is temporarily stored in the camera. New logs cannot be recorded if the log data
remains in the camera. After recording log data, save it to a memory card.
• See “Log Data Saved on Memory Cards” (E95) for more information.
C To Erase Log Data
• To erase the log data that is temporarily stored in the camera, select Erase log in step 5.
• To erase the log data that is stored on the memory card, press the l button in View log (E64).
End depth log
Start depth log
End GPS log
Start GPS log
End all logs
Start all logs
Create log
Erase logs
Save logs
End all logs