Filter
Top Products
10
Network Status
The status of the link between the server and the WT-1 is shown by the status
LEDs and by the Status display in the Wireless LAN menu.
The Status LEDs
The POWER LED lights when the WT-1 is receiving power from the camera.
(off) (off) (off)
Camera or exposure meters off, or Off selected
for Wireless LAN > Transceiver
N / A
*
N / A
*
(on)
Camera on and On selected for Wireless
LAN > Transceiver
BUSYLINKPOWERStatus
BUSYLINKPOWERStatus
(off) (off) (blinks)Connection error
(blinks) (blinks) (blinks)WT-1 hardware malfunction
BUSYLINKPOWERStatus
(off) (blinks) (on)Connecting to server
(on) (blinks) (on)Sending data
* Blinks to indicate active connection.
† Lights while data are being transmitted.
The status of the link between the WT-1 and the server is shown by the LINK
LED, which blinks at different speeds to indicate link quality. The BUSY LED
lights while data are being sent.
The following indicate that an error has occurred: