Nikon WT-1 Network Card User Manual


 
14
Deselect All
Remove “send,” “sending,” and “sent” marking
from all images on the memory card.
OK
Wireless LAN
SET UP
Deselect all?
No
Ye s
Option
Yes
Remove marking from all images and terminate
upload of images marked with “sending” icon.
No
(default)
Marking is not removed.
Description
Network Settings
Adjust settings for connection to the server. Set-
tings created using a computer can be loaded from
a memory card (
15), or network settings can be
adjusted individually using the camera menus ( 15–
25; sample settings are listed on page 26). To ensure
that the monitor does not power off before changes
to settings are complete, choose a long monitor off
delay or use an AC adapter when adjusting settings
manually.
Load settings file?
Wireless
TCP/IP
FTP
Wireless LAN
SET UP
Network settings
Text Entry in the “Network Settings” Menu
If text entry is required to complete the selected setting, the following dialog will be
displayed.
Keyboard area
Use multi selector to high-
light letters, press center
to select.
Text display area
Text appears in this area.
To move cursor, press
while using up, down, left,
and right buttons on multi
s
elector
.
SET UP
cursor OK
Use the multi selector to highlight the desired character in the keyboard area and press
the center of the multi selector to insert the highlighted character at the current cursor
position. To delete the character under the cursor, press the button. To move the
cursor to a new position, press the button while using the multi selector. No more
than thirty-two characters can be entered; if additional characters are entered when the
display is full, all characters after the thirty-third will be deleted.
To complete entry and return to the Network settings menu, press the button. To
exit to the setup menu without completing text entry, press .