Filter
Top Products
106 Maintenance Releases
Installing NIC firmware upgrades
Use this procedure to install NIC firmware upgrades. This procedure
requires the reboot of the server.
Prerequisites
• You must be assigned to the SSA role (ntsysadm).
•
You must have the CD containing the NIC firmware upgrade file.
Procedure Steps
Step Action
1
Load the NIC firmware upgrade CD into the CD-ROM drive.
2
Log on to the server as the SSA role (ntsysadm).
3 Reboot the server.
sudo reboot
4
If the operating system has been installed, change the boot
sequence so that the CD-ROM is the primary boot device by
doing the following:
• When the BIOS information appears, press F12 to select the
boot sequence.
• Select CD-ROM as the primary boot device.
Otherwise, wait for the server to reboot.
5
At the c:\update> prompt, type update 7978.
The NIC firmware patch is applied.
6
Remove the CD from the CD-ROM drive.
7 Use the ASM Remote Control to restart the server and boot to
the operating system:
Server > Tasks > Server Restart
--End--
Installing hard drive firmware upgrades
Use this procedure to install hard drive firmware upgrades. This procedure
requires the reboot of the server.
Prerequisites
• You must be assigned to the SSA role (ntsysadm).
• You must have the CD containing the hard drive firmware upgrade file.
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.