Filter
Top Products
AS 5300 initial software deployment 71
For more information, see Nortel AS 5300 Planning and Engineering
(NN42040-200).
Starting the System Management Console
The System Management Console uses Java Web Start technology and
is launched from a Web browser.
Prerequisites
•
The MCP software load has been deployed successfully.
Procedure Steps
Step Action
1
Open a Web browser and enter the following URL:
https://<SysMgr_IP_address>:12121
The System Management Console starts.
--End--
Updating the licensekey
Use this procedure to update the licensekey. You do not need to perform
this procedure if the licensekey was updated during the initial load
deployment.
Prerequisites
•
The licensekey code has been obtained from Keycode Retrieval
Services (KRS).
Procedure Steps
Step Action
1
Log on to the System Management console as admin. When
prompted, enter the admin password.
2 From the Network Data and Mtc navigation tree, select
Licensekey node.
The Licensekey window appears.
3 Click Edit .
4 Using the Select License key file window, browse to the
location of the licensekey file located on your local hard disk.
5 Open the file.
6 Click Apply.
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.