Filter
Top Products
70 AS 5300 software deployment
Deploying the initial software load
Use this procedure to deploy the initial AS 5300 software load.
Prerequisites
•
You must be assigned the AA role (ntappadm).
Procedure Steps
Step Action
1 Log on to the Element Management server as the AA role
(ntappadm).
2 Change directory:
cd /var/mcp/install
3 Deploy the system by issuing the following command:
./mcpInstall.pl -i <importFile> -t <tagsFile> -1
<licenseKeyFile>
The "Replication Process may take up to 45 minutes to
complete...Deploying DB" message appears.
Refer to "Deploying the initial software load job aid" (page 70) for
a description of these parameters.
--End--
Deploying the initial software load job aid
Several files are required as parameters to execute the mcpInstall.pl script.
For more information about script parameters and their descriptions, see
Table 10 "Installation script parameter definitions" (page 70).
Table 10
Installation script parameter definitions
File Definition
tagsFile Import tags file (StagingFedPBX*Server.tags) containing IP address/tag
and hostname/tag pairs. The file also contains sitename/tag value and
other tags. The install/upgrade scripts use the tagsFile to replace tags with
values in the given import XML file.
importFile
XML file (StagingFedPBX*Server.xml) containing server definitions,
Network Element instance definitions, start-up critical configuration data,
and default configuration data. This file is never manually modified by the
user.
licenseKeyFile The license key file to apply. This property (-l) is optional. The license key
may also be applied after the installation. If it is to be used, the license key
file should be copied to /var/mcp/install before running the script.
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.