Filter
Top Products
44
NN42040-105 Nortel AS 5300 Release 1.0 Standard 01.02 June 2008
3 Click Save to save your changes.
OR
Click Reset if you made changes and you do not want to save them.
Controlling your automatic login
To control your Unified Communications logon when using other Public
Switched Telephone Network (PSTN) telephone (such as a cell phone) that are
not hosted by the AS 5300 network, perform the following steps.
1 Select Preferences > Services > Unified Communications > Greetings >
Auto Identification.
2 Click Save, after you select an option to use automatic identification when
calling from your client.
3 Provide direct access to your mailbox by using the customizable option to
enter up to three different PSTN or Electronic Switched Network (ESN)
numbers.
4 Click Save to save your changes.
OR
Click Reset if you made changes and you do not want to save them.
Remember that the customizable option only allows you to enter valid PSTN or
ESN digits and not a user name. Only PSTN numbers that are not hosted by the
AS 5300 network can be used for automatic identification. For example,
automatic identification does not work when subscribers call from a known
device, such as the cell phone or home phone. The numbers listed in the Aliases
field in Preferences > Personal > Contact Info will not work. You would list a
user’s PSTN number as an Alias number for that user, so you would not enter that
number as an address to be auto-identified. Instead, you would use
auto-identification for the my client the user is logged on as.
Configuring recording time for incoming voicemail messages
To configure the maximum recording time for incoming voicemail messages,
perform the following steps.