Filter
Top Products
370 Chapter 19 Logs Screens
N0115790
Table 101 describes the fields in Figure 150.
Viewing LAN IP address
In the Reports screen, select LAN IP Address from the Report Type drop-down
list to have the BCM50a Integrated Router record and display the LAN IP
addresses that the most traffic has been sent to and from and how much traffic has
been sent to and from those IP addresses.
Table 101 Protocol/ Port Report
Label Description
Protocol/Port This column lists the protocols or service ports for which the most
traffic has gone through the BCM50a Integrated Router. The protocols
or service ports are listed in descending order with the most used
protocol or service port listed first.
Direction This column lists the direction of travel of the traffic belonging to each
protocol or service port listed. Incoming refers to traffic that is coming
into the BCM50a Integrated Router LAN from the WAN. Outgoing
refers to traffic that is going out from the BCM50a Integrated Router
LAN to the WAN.
Amount This column lists how much traffic has been sent and received for
each protocol or service port. The measurement unit shown (bytes,
Kilobytes, Megabytes or Gigabytes) varies with the amount of traffic
for the particular protocol or service port. The count starts over at 0 if a
protocol or port passes the bytes count limit (see Table 103 on
page 372).
Note: Computers take turns using dynamically assigned LAN IP
addresses. The BCM50a Integrated Router continues recording the bytes
sent to or from a LAN IP address when it is assigned to a different
computer.