Filter
Top Products
Chapter 5 System screens 83
BCM50a Integrated Router Configuration — Basics
Predefined NTP time server list
The BCM50a Integrated Router uses the predefined list of NTP time servers listed
in Table 11 if you do not specify a time server or if it cannot synchronize with the
time server you specified.
The BCM50a Integrated Router can use this predefined list of time servers
regardless of the Time Protocol you select.
Client User Setting The client user is the person who uses the BCM50a Integrated
Router's Contivity Client VPN tunnel.
The client user can do the following:
• Configure the WAN ISP and IP screens.
• Configure the VPN Contivity Client settings (except the
Advanced screen exclusive use mode for client tunnel and
MAC address allowed settings).
• View the SA monitor.
• Configure the VPN Global Setting screen.
• View logs.
• View the Maintenance Status screen.
• Use the Maintenance F/W Upload and Restart screens.
User Name Type a username for the client user (up to 31 characters).
New Password Type a password for the client user (up to 31 characters). Note
that as you type a password, the screen displays a (*) for each
character you type.
Retype to Confirm Retype the client user password for confirmation.
Apply Click Apply to save your changes to the BCM50a Integrated
Router.
Reset Click Reset to begin configuring this screen afresh.
Table 10 Password
Label Description