Nortel Networks BCM50a Network Router User Manual


 
394 Appendix A Troubleshooting
N0115790
Problems with the LAN LED
Problems with the LAN interface
Table 113 Troubleshooting the LAN LED
Problem Corrective Action
The LAN LEDs do not
turn on.
Check your Ethernet cable connections.
Check for faulty Ethernet cables.
Make sure the Ethernet Card in your computer is working properly.
Table 114 Troubleshooting the LAN interface
Problem Corrective Action
I cannot access the
BCM50a Integrated
Router from the LAN.
Check your Ethernet cable type and connections.
Make sure the Ethernet adapter is installed in the computer and functioning
properly.
I cannot ping any
computer on the LAN.
Check the 10M/100M LAN LEDs on the front panel. If they are all off, check the
cables between your BCM50a Integrated Router and hub or the computer.
Verify that the IP address and the subnet mask of the BCM50a Integrated Router
and the computers are on the same subnet.