Filter
Top Products
50 SUPERSTAR II User Manual Rev 3
Appendix B FlexPak-SSII Specifications
B.1.1 Status Indicators
The FlexPak-SSII provides the status indicators shown in Table 9.
Table 9: FlexPak Status Indicators
B.1.2 Port Pin-Outs
The pin numbering for each of the ports, is described in Table 10.
Table 10: FlexPak COM Ports Pin-Out Descriptions
See also Section 3.4, Connectors and Connector Pins Assignment on Page 22.
Indicator Indicator Color Status
COM1
Green Data is being transmitted from COM1
Red Data is being received on COM1
COM2
Green Data is being transmitted from COM2
Red Data is being received on COM2
ANT Green Valid position computed
PWR Red The receiver is powered
COM1 (Deutsch TTL) COM2 (Deutsch TTL)
Connector Pin No. Signal Name Connector Pin No. Signal Name
1 Reserved
1 Reserved
2RXD1
2RXD2
3 Reserved
3 Reserved
4 Reserved
4 Reserved
5GND
5GND
6 Reserved
6 Reserved
7 Reserved
7 Reserved
8TX1
8TXD2
9
Reserved
9 Reserved
10
10 PPS
11
11 Reserved
12
12
DISC_IP1
a
a. Leave open or tie to ground for normal operation. Set high for programming mode only.
13
13 Reserved