Filter
Top Products
292 Océ TDS600 Multifunctional Digital System User Manual
▼
▼▼
▼
Fold settings from the Océ TDS600 scanner operating panel
1
Open the ‘Feeding’ card in the ‘Original’ section and press the ‘Legend
location’ function button to select the required legend location (‘Leading’ or
‘Trailing’).
Note:
Make certain that your legend is always located on your left-hand
side to ensure correct positioning of the legend during folding.
Press the ‘Drawing method’ function button to select ‘Standard’, ‘Ericsson’ or
‘Afnor’ fold.
[193] Fold options from the scanner operator panel
2 Open the ‘Finishing’ card in the ‘Print’ section.
3 Press the ‘Folding’ function button to select ‘Full’ or ‘First fold only’ (see
figure 194).
4 Press the ‘Folded package’ function button and change the length and/or width
of the folded package, as required, by using the arrow buttons or the numeric
buttons.
5
If required, press the ‘Binding’ function button.
Set the required binding edge using the arrow buttons or the numeric buttons.
6
Make other settings as required.
Feed the original.
[194] Fold options from the scanner operator panel