Filter
Top Products
ES 2024/2024e Setting up • 67
Network Menu
This menu only appears if a network card is installed.
The default settings are bold.
Item Value Description
TCP/IP
ENABLE; DISABLE Selects TCP/IP protocol.
NETWARE
ENABLE; DISABLE Selects Netware protocol.
ETHERTALK
ENABLE; DISABLE Selects EtherTalk protocol.
NETBEUI
ENABLE; DISABLE Selects NetBEUI protocol.
FRAME TYPE
AUTO; 802.2; 802.3
ETHER-II; SNAP
Selects Ethernet frame type.
DHCP/BOOTP
ENABLE; DISABLE Selects whether selection of DHCP/
BOOTP is automatic.
RARP
ENABLE; DISABLE Selects whether selection of RARP is
automatic.
IP ADDRESS
xxx.xxx.xxx.xxx Configures IP address.
SUBNET MASK
xxx.xxx.xxx.xxx Configures subnet mask.
GATEWAY
ADDRESS
xxx.xxx.xxx.xxx Configures gateway address.
PRINT
SETTINGS
ON; OFF Selects printing of network menu
map.
ON = When printer exits the menu
mode it will print the network
MenuMap showing results of
self-diagnosis and settings.
INITIALIZE
ON; OFF Selects network initialization.
ON = network initializes as the
printer exits the menu.