Filter
Top Products
10
|
Handbook
fax/copy after loading the document. Use the Photo setting
when the original document includes half-tone images.
10 Type of Original Key (Dark, Normal, Light indicator
lights): Use this key to set the contrast after loading the
document. Use Light for originals that are too light,
Normal for originals with good contrast, and Dark for
originals that are too dark.
11Clear Key: Use this key to cancel ID, telephone number
and programming entries.
12 Menu/Exit: Use this key:
- To activate the Menu modewhen the machine is in
standby state.
- To Exit the mode and return to standby state.
13 */Tone Key: If the machine is set for pulse dialing,
pressing this key will switch from pulse to tone dialing
during the current call. This key can also be used during
programming to create numbers with mixed pulse-tone
operation.
14 0/Unique Key: Use this key as “0” when dialing telephone
numbers. When programming the Sender ID, Location
ID, etc., use this key to enter unique characters: Symbols
(! # & ‘ ( ) * + , - . / : ; = ? · , Umlaut characters (ÄßÑÖÜ),
and Norwegian characters (ÆÅØæåø).
15 Numeric Keypad: These 12 keys work like the keypad on
a standard telephone when dialing a telephone number.
They are also used to move to another operation mode,
enter numbers, letters and other characters when
programming the machine, and input speed dial numbers
after pressing the Speed Dial key. The “#” key is used for
the creation of groups of telephone numbers for batch
transmission. After a document is loaded, this key can
also be used to select previously programmed groups of
telephone numbers for faxing.
16 Redial Key: Press this key to automatically redial the last
telephone number dialed on the machine.
17 Hook Key: Use this key to open the telephone line for
manual dialing with the numeric keypad or external
telephone handset. After pressing the key, it will be
possible to hear the dial tone and dialing code through the
machine’s speaker.
18 Speed Dial/Search Key: After loading a document for
faxing, press this key and then enter the programmed