Filter
Top Products
104 Appendix D: Printer Commands
Automatic Line Feed
Control
n
/
360
-inch Line Feed
n
/
216
-inch or
n
/
180
-inch
Line Feed
Form Feed
Vertical Tab
Set Vertical Tab Stops
Set Form Length in
Inches
ASCII: ESC 5
Dec: 27 53 n
Hex: 1B 35 n
ASCII: ESC % 4 n
Dec: 27 37 52 n
Hex: 1B 25 34 n
ASCII: ESC J n
Dec: 27 74 n
Hex: 1B 4A n
ASCII: FF
Dec: 12
Hex: 0C
ASCII: VT
Dec: 11
Hex: 0B
ASCII: ESC B n
1
n
2
··· n
k
NUL
Dec: 27 66 n
1
n
2
··· n
k
0
Hex: 1B 42 n
1
n
2
··· n
k
00
ASCII: ESC C NUL n
Dec: 27 67 0 n
Hex: 1B 43 00 n
IBM
Function
Commands
(ASCII, Decimal, Hexadecimal)
n=Odd: Line feed automatically added
to each CR (carriage return)
n=Even: auto line feed turned Off
OKI unique command. Prints data in
buffer and executes a single
n
/
360
-inch
line feed without changing line spac-
ing.
n=1 to 255
n=0: no line feed
In PPR emulation, prints data in buffer
and executes a single
n
/
216
-inch line
feed: in AGM emulaiton, executes a sin-
gle
n
/
180
-inch line feed, both without
changing line spacing. Carriage Return
determined by menu setting.
n=1 to 255
n=0: no line feed
Prints data in buffer and advances pa-
per to next top of form. With Cut Sheet
Feeder installed, will eject or insert pa-
per depending on status of feeder.
Print buffer data and move to next ver-
tical tab stop.
Sets vertical tab stops at specified lines.
k=1 to 64: number of tabs
n=1 to 255: line number where tabs is to
be set
Sets page length in inches.
n=1 to 255 inches
n=0: Command ignored
This command cancels Skip Over Per-
foration setting.
Notes