Filter
Top Products
ML790/791 Printer Handbook 19
14.Push FF/LOAD button. Paper will au-
tomatically feed into printer and
ALARM light will go out.
15.Baseline for top of Form(TOF) on pa-
per is indicated by red line on clear plas-
tic paper shield.
M
1
2
3
Baseline
16.If desired, change TOF setting using
control panel:
If form tear off is being selected in the
printer menu, press the TEAR button
to bring the paper down to the print
position. Hold down the SHIFT button
and release the TEAR button.
☛ to set TOF further down on page,
hold SHIFT button while pressing FF/
LOAD button: this will advance paper
up in micro increments
Press to hold the
paper before
releasing the TEAR
button.
Press to bring
the paper down
to the print
position.