Filter
Top Products
Microline 8480FB User’s Guide
Control Panel • 14
Quick Reference: Control Panel Functions
Note Unless otherwise specified, these instructions assume that the
printer is selected (on line).
Enter the Menu
1. Press SEL.
2. Press both the MODE and the
SHIFT switches simultaneously.
Print the Menu
1. With the printer in the Manual
Mode, turn it off.
2. Press and hold SELECT and
MODE while turning the printer
on.
3. When prompted, load a sheet
of paper (minimum letter or
A4) on the platform.
Change Print Modes
With the printer on line:
1. Press LF to engage the Normal
Print Mode.
2. Press MODE to engage the High
Impact Print Mode.
3. Press FF to engage the High
Speed (Draft) Print Mode.
Change the Printhead
Gap
1. Press SEL.
2. Press and hold the SHIFT
switch, then press the LOAD
switch repeatedly to scroll
through the various settings for
the printhead gap.
3. Press SEL
Change Paper Paths
1. Press SEL.
2. Press MODE repeatedly to
change the paper path.
The printer automatically
reinitializes in the new path.
Move Continuous Forms
to the Print Position
1. Press SEL.
2. Press FF.
Park Continuous Forms
1. Press SEL.
2. Press LOAD.
Move Continuous Forms
to the Tear Off Position
Note Form Tear Off must be
activated (see page 61).
1. Press SEL.
2. Press and hold the SHIFT and
SEL switches to move
continuous forms up to the tear
off position.
Change Align x Setting
1. Press SEL.
2. Press and hold the MODE
switch, then press the SHIFT
switch repeatedly to select
Align 1, Align 2, Align 3, or
Align 4