Filter
Top Products
Microline 8480FB User’s Guide
• 44
CutSheet Smooth
Helps to correct for paper curl when feeding in a form manually
through the platform. Available settings: Valid [the default] or
Invalid.
Eject Dir.
Choose where the paper is ejected when you are using manual
feed from the platform: Front [the default] or Rear.
Emulation Mode
Choose the printer emulation: Epson LQ [the default], IBM PPR,
IBM AGM, or Diablo.
Form Tear-Off
The default is Off. To activate Form Tear-Off, change the setting to
On.
The Forms Tear-Off feature allows a printed continuous form page
to be torn off without wasting paper or adjusting the printer.
For more information, see page 61.
Front Load Adj.
For fine tuning the Top of Form (TOF) location when using
continuous forms (front feed). Settable from -40 to +40 in
increments of 1/120 inch. The default is 0.
Negative values decrease the space down from the top of the
form:
•TOF moves up
•paper moves down.
Positive numbers increase the space down from the top of the
form:
•TOF moves down
•paper moves up.
Gap Control
Sets whether the printhead gap is set automatically [the default]
or manually.