Oki 8480FB Printer User Manual


 
Microline 8480FB User’s Guide
• 47
Initial Pos.
Choose where continuous form paper will be positioned when the
printer is turned on.
Print [the default]: the paper is in a ready-for-printing position.
Tear: the paper is at the tear-off position.
Language Set
Replaces certain standard symbols with special characters used in
foreign languages. Choose American [the default], French,
German, British, Danish 1, Swedish, Italian, Spanish I, Japanese,
Norwegian, Danish II, Spanish II, Latin American, French
Canadian, Dutch, or Publisher.
Line Spacing
The default is 6 LPI (lines per inch). Change to 8 LPI to get more
lines on a page.
LF Revise (Cut)
Adjust the line feed value for manual feed using the platform.
Settable from -10 to +10. The default setting is 0.
Load LF Speed
Choose the paper feed speed for inserting sheets when you are
using manual feed from the platform: Fast Speed [the default] or
Slow Speed.
Memory Auto Align
The default is Valid. This causes the Auto Align setting made using
the front panel switches MODE and SHIFT (see page 11) to be
stored in the printer’s memory. Change to Invalid if you do not
wish this value to be stored.
Multi Pass
Select the print direction (Bi-directional: the default, or
Uni-directional) for a line containing double-height print.
Page Length
Choose the length of the manual feed paper you are using: 279.4
mm (11") [the default] or 304.8 mm (12").