Filter
Top Products
Microline 8480FB User’s Guide
• 51
Reset Inhibit
The default is No. Change this to Yes to prevent your software
from resetting your printer’s settings. The printer will ignore an
INITIAL command.
Set Alarm
Controls the Paper Set Alarm. Available settings are Valid [the
default] or Invalid.
Change to Invalid if the Paper Set Alarm sounds when you try to
load preprinted forms with anomalies at the top, such as a large
dark area or a cutout. These types of forms defeat the paper
sensors.
SI Pitch (10)
IBM emulation only.
Sets the pitch to be engaged when the printer control panel is set
for 10 cpi and the SI command is received. Choose 15 cpi or 17.1
cpi [the default].
SI Pitch (12)
IBM emulation only.
Sets the pitch to be engaged when the printer control panel is set
for 12 cpi and the SI command is received. Choose 12 cpi or 20 cpi
[the default].
Size
The default is Single. Choose Double for double width and height
printing.
Skew Detect
Detects and corrects paper skew when manual feed through the
platform is being used with Auto Align disabled. Available
settings: Valid Level 1, Valid Level 2 [the default], or Invalid.
Change to Valid Level 1 if you wish the detection to be more
precise.
Change to Invalid if you are experiencing difficulty getting forms to
load into the printer when using preprinted forms with anomalies