Filter
Top Products
Microline 8480FB User’s Guide
• 52
at the top such as a large dark area on one side or a cutout. Such
types of forms defeat the skew sensor.
Skp Ovr Binding
Choose Invalid, Valid 1 [the default] or Valid 2.
Valid 1
• Continuous forms only
• before Form Feeding
• before Perforation Skip
• line feeding of 18 mm (.71") or more
Valid 2
• Continuous forms and manual feed
• before Form Feeding
Skip Over Perf.
Sets what happens when the printer comes within 1-inch (25 mm)
of the bottom of the page. The default is No, for use when your
software has its own page formatting controls. Change to Yes if
you want the printer to go to the next page when it comes within
1” (25 mm) of the bottom of the page.
Style
The default is Normal. Choose Italic if you want the printed
characters to be slanted.
TOF
Top of Form sets the position down from the top of the page at
which printing starts. The default is 6.35 mm (1/4") from the top
of the page to the vertical middle of the first print line.
Note The amount of adjustment is limited to avoid paper jams.
Form Unusable with Auto Align.bmp