Filter
Top Products
Microline 8480FB User’s Guide
Loading Print Media • 21
5. Open both tractor covers and place the first three holes in the
continuous forms paper over the pins.
Important!
Make sure that an equal number of paper holes are engaged
on each tractor. If not, the paper will jam.
6. Close the tractor covers and fine tune the position of the right tractor
until the holes in the paper are centered on the pins, then push back the
right tractor lock lever.
7. Lower the platform.
F5-06a.JPG
F5-06b.JPG
F5-07a.JPG