Filter
Top Products
B6250 User’s Guide> 102
Paper cannot be
fed.
Paper jam.
Multiple papers
are fed.
Papers are fed at
an angle.
Paper is
wrinkled.
Is the paper correctly set? Load the paper correctly. For
labels, transparencies or envelopes, fan them well first to
allow air to enter between each sheet before loading.
“ Loading Paper” (P. 40)
Is the paper damp? Replace with paper from a new ream.
“ Loading Paper” (P. 40)
Is the correct type of paper used? Load the correct type of
paper.
“ Usable Paper” (P. 36)
Is the paper tray set correctly? Push the paper tray
completely into the printer.
Is the printer placed on a flat location? Place the printer on a
stable surface.
Setup Guide Safety Notes
Are the paper tray guides set in the correct positions? Set the
length guide and right width guide in the correct positions.
“ Loading Paper in a Paper Tray” (P. 40)
Have you used any picture papers? Clean the feed roll.
“ Cleaning the Feed Roll” (P. 131)
Papers are fed in more than 1 sheet. Multiple feeding of
papers may occur before the sheets of paper loaded in the
tray are used up. Fan the paper to be loaded and load again.
Replenish paper only when all the sheets of the loaded paper
are used up.
Symptom Reason/Action