Filter
Top Products
B930n User’s Guide> 107
> CAUTION: Never touch areas labelled as “High
Voltage.” You can get an electric shock. Never touch a
labelled area found on or near the heat roller. You can
get burned. If a sheet of paper is wrapped around the
heat roller, do not try to remove it by yourself to avoid
injuries or burns. Switch off the machine immediately,
and contact your service provider.
• Remove any remaining pieces of paper.
• Remove any dust or stains with a dry clean cloth.
W
HEN
N
OT
IN
U
SE
FOR
A
L
ONG
T
IME
Carry out the following procedure if you are not going to use the
printer for a long period of time.
1. Press the power switch to the <{> position to turn the
power off.
2. Remove all connection cords, such as the power cord and
interface cables. See “Rear View” on page 9 for connector
diagrams.
3. Remove the paper from the paper trays and store it in a
location free of humidity and dust.
NOTE
> for details on storing the paper
M
OVING
THE
P
RINTER
Carry out the following procedure when moving the printer.
CAUTION
> When lifting the machine, get a firm footing and bend
your knees to avoid possible injuries to your back
NOTE
> The weight of this printer, without the optional
accessories, paper tray, consumables and paper, is 41.0
kg or 90 lbs. If the optional duplex module or tray module
has been installed, uninstall it before moving the printer.
Otherwise, they may fall to the ground and cause injuries.
Refer to “Installing Accessories” on page 164 for details
on uninstalling the optional accessories.
> When lifting the printer, there should be 2 persons, one in
front and one behind the printer, to firmly grip the