Filter
Top Products
100 User’s Guide
Installing for Windows 98
To install the OKI USB Interface Kit to enable you to
operate your DP-5000 printer with a Windows 98 com-
puter, follow these steps:
Note:
You must delete any previously installed OKI DP
Series printer driver prior to installing the USB printer
driver. The new OKI printer driver enables you to
print using the USB interface cable, as well as the par-
allel printer cable.
Deleting the OKI printer driver
1. Choose
Settings
from the
Start
menu, and then
select
Printers
.
2. In the Printers window that appears, right-click
the
OKI DP-5000 Series
printer icon and then
select
Delete
from the menu. Click
Yes
to delete
the printer driver.
Installing the USB printer driver
1. If you haven’t already set up your printer, please
do so by following the instructions included with
the printer.
WARNING
Make sure the computer and printer are turned off
before you connect the USB interface cable.
2. Connect the USB interface cable (1) to the paral-
lel connector (2) on the printer.
3. Connect the other end of the USB cable to an
available USB port on your computer. Be sure to
orient the connector on the USB cable to match
the connector on your computer.
4. Now turn on the printer, and then turn on the
computer.
5. Windows will inform you that it has detected new
hardware (USB Cable) and the
Add New Hard-
ware Wizard
will appear on screen.
1
2