Filter
Top Products
Menu Functions • 43
NOTE
The printer automatically adjusts color balance and
density at appropriate intervals, optimizing the printed
output for bright white paper viewed in natural daylight
conditions. The items on this menu provide a means of
changing the default settings for special or particularly
difficult print jobs. Settings revert to their default values
when the next print job is complete.
Color Menu
Note: Factory default settings are shown in bold.
Item Settings Explanation
DENSITY
CONTROL
AUTO
MANUAL
AUTO = image density is automatically
adjusted:
• at power on
• when a new image drum or toner
cartridge is installed
• at intervals of 100, 300 and 500 drum
counts
Auto adjustment takes up to 55
seconds.
Switch to manual only if you wish to
initiate Density Control manually using
the printer menu.
AUTO DENSITY EXECUTE Selecting this will perform the auto
density set up.
COLOR TUNING PRINT
PATTERN
Prints the pattern for the user to
manually adjust TRC. Ordinarily this
function is not needed because TRC is
automatically adjusted. See “Setting
Color Tuning from The Front Panel” on
page 66.