Filter
Top Products
|
Developer’s Guide: English 37
2.3.3 How to Operate
Start
To start the Menu Mode, turn the printer on while holding down SW2 + SW1. When the printer’s initialization ends correctly,
the printer prints the title “Menu Print” and all the menu items and set values. Then, the printer line-feeds until the print result
goes beyond the Manual Cutter position, prints the item/set value immediately after “Menu Print,” then waits for a switch to be
pressed.
Operation
The switch functions during the menu mode are as follows:
A25008.doc
Switch Function
SW2
Advances the set values of the Menu Item, one at a time. From the last set
value, returns to the first set value.
SW3 Ends Menu Mode.
Registers the set values in EEPROM, then prints the end message “Menu
End” and returns to the same initialized state as at power on.
SW1 Advances the Menu Items, one at a time.
From the last Menu Item, returns to the first Menu Item.
SW4 Feeds the receipt, by one line