Filter
Top Products
|
Developer’s Guide: English 85
5.7.5.3.8 Corner Cut
Do not use paper with corner cuts. It may invalidate your warranty.
If you choose to use corner cut paper, be sure to test it thoroughly. Follow these guidelines:
1 Do not print within the shaded area adjoining a corner cut.
2 Make sure that paper dust is not left on the paper.
3 The perforation of the vertical/horizontal perforated line must not intersect with the corner cut to prevent the paper
from peeling off. (The crossing position of the corner cut outline and the perforated line should be uncut.)
The carriage may be clogged with peeled-off paper.
4 If a corner cut passes over the paper sensor, a false Paper End signal may result.
5 The positions of corner cuts should be as given in the fig. below.
OP425_27.eps
1 Uncut part of the perforated line
2 Corner cut
3 No printing within the shaded area
4 Unit: mm
1
2
3
4