Filter
Top Products
|
Developer’s Guide: English 93
6.1.1.3 GS sequence
1 Command recognition
GS codes in combination are handled the same way that ESC codes are handled.
2 GS Sequence table
A25039.doc
No. HEX Command Sequence Functions Print Start
1 1D 45 GS E n To select print speed and printhead current
flow time.
X
2 1D 76 GS v n To select Validation inserting position X
6.1.1.4 US Sequence
A25038a.doc
No. HEX Command Sequence Functions Print Start
0 1F 0E US 0EH n High Priority (special) command X
1 1F 0E 00 US 0EH 00H Eject or form feed X
2 1F 0E 01 US 0EH 01H Line feed X
3 1F 0E 02 US 0EH 02H Full cut X
4 1F 0E 03 US 0EH 03H To cut partially. (Uncut at 1 point) X
5 1F 0E 05 US 0EH 05H Auto load (Sprocket) X
6 1F 0E 06 US 0EH 06H Auto park (Sprocket) X
7 1F 0E 07 US 0EH 07H To feed to the cut position (Sprocket) X
8 1F 0E 08 US 0EH 08H To feed to the print position (Sprocket) X
9 1F 0E 09 US 0EH 09H Receipt LF X
10 1F 0E 0B US 0EH 0BH Journal LF X
11 1F 0E 10 US 0EH 10H n Slip LF X
12 1F 0E 11 US 0EH 11H n1 n2 n3 n4 LED control X
13 1F 0E 14 US 0EH 14H n Receipt Paper Removal Receiver Feed X
14 1F 0E 15 US 0EH 15H n Journal Paper Removal Receiver Feed X