Filter
Top Products
115
Using Socket Services with Socket Service Request Switches Section 6-2
Parameter Settings
The following table shows the parameters that are required for each service
and the use of the parameters by the socket service.
UDP Socket Services
Note W: Written by user.
RW: Written by user at execution and then read for results at completion
R: Read by user for results at completion
---: Not used.
TCP Socket Services
Note W: Written by user.
RW: Written by user at execution and then read for results at completion
R: Read by user for results at completion
---: Not used.
UDP/TCP Socket No.
Specify the number of the UDP or TCP socket to open.
Parameter No. of
words
Range
(decimal values in
parentheses)
Socket service
UDP
open
UDP
receive
UDP
send
UDP
close
UDP/TCP socket No. 1 0001 to 0008 Hex
(1 to 8)
WWWW
Local UDP/TCP port No. 1 0000 to FFFF Hex
(0 to 65,535)
W --- --- ---
Remote IP address 2 00000000 to FFFFFFFF Hex
(0.0.0.0 to 255.255.255.255)
--- R W ---
Remote UDP/TCP port No. 1 0000 to FFFF Hex
(0 to 65,535)
--- R W ---
Number of bytes to send/receive 1 0000 to 07C0 Hex
(0 to 1,984 bytes)
--- RW RW ---
Send/Receive data address 2 Memory area address --- W W ---
Time out time 1 0000 to FFFF Hex
(0 to 65,535)
(0: No limit, 0.1 to 6,553.5 s)
--- W --- ---
Response code 1 --- RRRR
Parameter No. of
words
Range
(decimal values in
parentheses)
Socket service
TCP
passive
open
TCP
active
open
TCP
receive
TCP
send
TCP
close
UDP/TCP socket No. 1 0001 to 0008 Hex
(1 to 8)
WWWWW
Local UDP/TCP port No. 1 0000 to FFFF Hex
(0 to 65,535)
W RW --- --- ---
Remote IP address 2 00000000 to FFFFFFFF Hex
(0.0.0.0 to 255.255.255.255
RW W --- --- ---
Remote UDP/TCP port
No.
1 0000 to FFFF Hex
(0 to 65,535)
RW W --- --- ---
Number of bytes to send/
receive
1 0000 to 07C0 Hex
(0 to 1,984 bytes)
--- --- RW RW ---
Send/Receive data
address
2 Memory area address --- --- W W ---
Time out time 1 0000 to FFFF Hex
(0 to 65,535)
(0: No limit, 0.1 to 6,553.5 s)
W --- W --- ---
Response code 1 --- RRRRR