Omron CS/CJ Series Network Card User Manual


 
170
Using FTP Commands Section 7-5
An error will occur if a file or directory of the same name already exists in the
working directory.
rmdir
Format rmdir DIRECTORY_NAME
Function Deletes the directory of the specified name from the remote host (Memory
Card or EM File Memory).
The directory must be empty to delete it.
An error will occur if the specified directory does not exist or is empty.
pwd
Format pwd
Function Displays the remote host’s (Ethernet Unit) current work directory.
cd
Format cd [directory_name]
Function Changes the remote host (Ethernet Unit) work directory to the specified
remote directory.
The files in the Memory Card are contained in the MEMCARD directory under
the root directory (/). The files in EM File Memory are contained in the EM
directory under the root directory (/). The root directory (/) is the directory
used when logging into the Ethernet Unit. No MEMCARD directory will exist if
a Memory Card is not inserted in the PC or if the Memory Card power indica-
tor is not lit. No EM directory will exist if EM File Memory does not exist.
cdup
Format cdup
Function Changes the working directory at the remote host to the parent directory (one
directory above the current working directory).
type
Format type data_type
Function Specifies the file data type. The following data types are supported:
ascii: Files are transferred as ASCII data
binary (image): Files are transferred as binary data.
All files are treated by the PC as binary files. Before reading or writing any
files, always use the type command to set the file type to binary. File con-
tents cannot be guaranteed if transferred as ASCII data.
The default file type is ASCII.
get
Format get FILE_NAME [receive_file_name]
Function Transfers the specified remote file from the Memory Card or EM File Memory
to the local host.
A receive file name can be used to specify the name of the file in the local
host.
mget
Format mget FILE_NAME