Filter
Top Products
Edit File Mode
106
If a memory communication has been unsuccessful due to a busy line or no answer, the document you
stored is automatically erased from memory after the last redial.
If you need to retain the document even if the communication failed, change the setting of Fax Parameter
No. 031 (INC. FILE SAVE) to Valid in advance. (See page 191)
To retry the incomplete file, print a File List first to verify the file number. (See page 104)
Then, follow the steps below.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
NOTE
1. To confirm or change the entered telephone number for the file, see page 99 and 101.
2. If you set Fax Parameter No.031 to Valid, all incomplete files will remain in the memory. To
avoid memory overflow, please check the memory content frequently. We recommend that
optional flash memory card is installed when this function is used. (See page 217)
Retry an Incomplete File
1
2
3
Select the file that you want to retry.
4
Your machine will retry the file and start dialing immediately.
MODE SETTING EDIT FILE MODE
BASIC MENU
DELETE FILE PRINT FILE
FILE LIST CHANGE TIME/STN
ADD DOCUMENT RETRY INCOMP. FILE
PRINT OUT
STD FINE
TEXT/PHOTO
MEMORY XMT
ADDRESS BOOK
S-FINE
600dpi
LIGHTER DARKER
TEXT PHOTO
DEFERRED
COMM.
POLLING/
ADV.COMM.
SELECT
MODE
EDIT FILE
MODE
Edit File Mode
Select A Function
RETRY INCOMP. FILE
Retry Incomp. File
Check Setting
Press OK
MEMORY XMT No.003 P002
INCOMP SALES DEPT
Retry Incomp. File
Check Setting
Press OK
MEMORY XMT No.003 P002
INCOMP SALES DEPT
OK