Safety Information
12
[For DP-3510/3520/4510/4520/6010/6020]
Connecting the Cables
ACTIVITY Lamp
Blinks when there is data traffic
on the LAN.
LINK Lamp
Illuminates when connected to the LAN.
Lamp will not turn ON if LAN cable is defective
(contains breaks).
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
10Base-T/100Base-TX Ethernet Hub
Ethernet LAN
(10Base-T/100Base-TX)
Cable (Not included)
Ethernet-Token-Ring
Bridge
(Optional Order
No. UE-204006)
RJ-11C
Telephone Jack
Plug one end of the
telephone line cable into
the "RJ-11C" telephone
jack supplied by the
telephone company and
the other end into the LINE
jack on the left side of the
machine. (For setting the
Dialing Method,
see pages 175 and 190)
Telephone Line Jack
You can connect an
additional standard single
line telephone to the
machine. To connect the
telephone, remove the
protective tab on the TEL
jack.
External Telephone Jack
After connecting all cables
and the Power Cord, turn the
Main Power Switch on the Back
and the Power Switch on the Left
Side of the machine to the ON
position.
Power Switch