Filter
Top Products
Sending Documents
28
On-Hook Dialing
For On-Hook Dialing, follow the steps below.
NOTE
1. If you need a special access number to get an outside line, dial it first then press to
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press (represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
On-Hook Dialing
1a
Place original(s) face up on the ADF.
or
1b
Place a book or an original face down on the Platen Glass.
2
You will hear dial tone through the monitor speaker.
If required, press the key, and adjust the Monitor volume.
(See page 176)
3
Dial the telephone number using the keypad.
Ex:
4
When you hear a beep,
SET
5 5 5 1 2
3
4
PAUSE
TONE