Filter
Top Products
Pre Installation Information
109
Internet Fax
Features
To install your machine as POP3 Client, the following network parameters need to be programmed on your
network.
• TCP/IP Address of your machine
• TCP/IP Subnet Mask of your machine
• TCP/IP Address of the Default Gateway
• TCP/IP Address of the DNS Server (if not available, see note 2)
• Email Address of your machine (see note 1)
• Name or IP Address of the Default SMTP mail server
• POP Server Name or IP Address
• POP User Account Name
•POP Password
Email Transmission (from your machine to a PC)
Email reception (from a PC to your machine)
NOTE
1. The email address format can be the same as your regular email address. If your email
address is popuser001@panasonic.com, your machine's email address can be
Internet_Fax@panasonic.com.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP and POP Server Names.
If the DNS Server is not available, change the 27/26*(DNS server address) of General Settings
to "No" ( , Input ID
Code, .). Then the machine will prompt you to enter
the IP Address of the SMTP and POP Servers.
* Certain Parameter Numbers may differ between the DP-2310/3010 and DP-3510/3520/4510/
4520/6010/6020 series. If you encounter two Parameter Numbers separated by a "/" and an
asterisk ("*"), the first number corresponds to (DP-2310/3010) and the second number
corresponds to (DP-3510/3520/4510/4520/6010/6020).
Setup as POP3 Client
ifaxuser@fax01.panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
Gateway(Router)
popuser001@panasonic.com
SMTP
POP3
ifaxuser@panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
Gateway(Router)
popuser001@panasonic.com
SMTP
POP3
FUNCTION
GENERAL SETTINGS
04 Key Operator Mode
09/04* Key Operator Mode
OK
27/26* DNS Server Address