Filter
Top Products
Component Identification
13
∫ Power turn-on sequence
1
Turn on the power of the scanner.
≥ The power indicator (LED) will now light.
∫ About the power indicator (LED)
The power indicator (LED) indicates the status of the scanner as follows:
*
1
: The rollers need to be cleaned or replaced.
Refer to Operating Instructions (CD-ROM) for the way of cleaning or replacing the rollers.
*
1
, *
2
: Check the status of the scanner using the User Utility.
The User Utility is included in the CD-ROM.
Refer to "Installing Software" in the Installation Manual.
LED light Status
Green Ready to scan or scanning
Green (flashing) Sleep mode
Orange Ready to scan or scanning with caution *
1
Orange (flashing) Initializing
Red An error occurred *
2
Power indicator
(LED)
Power switch