Filter
Top Products
Changing the Reference Plate Setting
29
5
Close the exit door slowly until it clicks
into place.
∫ Flatbed sheet setting
1
Turn off the scanner.
2
Fold the hopper tray in the direction of
the arrow (1).
3
Open the document cover (2) and
remove the flatbed sheet from the
flatbed cover (3).
≥ The flatbed sheet is attached to the
document cover with magnets.
4
Turn the flatbed sheet over, and then
place it in the upper left corner of the
flatbed glass.
≥ Set the flatbed sheet to the left.
5
Close the document cover.
≥ When you close the document cover,
close it securely until it is locked.
The flatbed sheet will become
magnetically attached to the document
cover.
Hopper tray
Document coverFlatbed sheet
Flatbed sheet
Standard mark