Filter
Top Products
Cleaning the Unit
38
∫ Cleaning the paper and waiting sensors, double feed detector
How to clean sensors (detectors) and reflectors.
Remove the brush from the accessory blower and blow off the dirt with the blower.
1
Turn off the scanner.
2
Push the ADF door release to open the
ADF door.
3
Blow off the dirt on the surface of the
paper sensor and waiting sensor with
an accessory blower.
4
And also blow off the dirt on the
surface of the reflector sheet for the
waiting sensor with the accessory
blower.
5
Blow off the dirt from the double feed
detector (G) and double feed detector
(R) with the accessory blower.
6
Close the ADF door.
≥ When you close the ADF door, close it
securely until it is locked.
Blower
Sensor (detector)
Waiting sensor
Reflector sheet
for waiting sensor
Paper sensor
Double feed detector (G)
Double feed detector (R)