Filter
Top Products
Cleaning the Unit
34
5
Use the roller cleaning paper (KV-
SS03) to remove the dirt from the
surface of the double feed prevention
roller.
Note:
≥ When wiping off the dirt on the roller
surfaces, hold the rollers to prevent them
from rotating, and wipe the roller all the
way around them proceeding from one
end to the other in the direction of the
arrows shown in the figure.
6
Close the double feed prevention
conveyor in the direction of the arrow
shown in the figure.
7
Close the ADF door.
≥ When you close the ADF door, close it
securely until the door is locked.
8
Clear the roller cleaning counter with
User Utility.
≥ After cleaning the above rollers, click
[Clear Counter] button for [After Clean
Roller] with User Utility.
Double feed prevention roller
Double feed
prevention roller
Double feed
prevention conveyor
ADF door