Filter
Top Products
Cleaning the Unit
40
∫ Cleaning the flatbed glass and document cover detector
How to clean sensors (detectors).
Remove the brush from the accessory blower and blow off the dirt with the blower.
1
Turn off the scanner.
2
Fold the hopper tray in the direction of
the arrow.
3
Open the document cover.
4
Clean up the surface of flatbed glass
with the roller cleaning paper (KV-
SS03) to remove the dirt.
(Also clean up the surface of the
flatbed sheet, as required.)
5
Blow off the dirt from the document
cover detector.
6
Close the document cover and put
back the hopper tray to the original
position.
Blower
Sensor (detector)
Hopper tray
Document cover
Flatbed sheet
Flatbed glass
Document cover detector